Halkvarnare för applicering på vägbanan: test av prototyp i laboratorium och i fält
2008 (Swedish)Report (Other (popular science, discussion, etc.))
Abstract [en]
In order to draw the attention of drivers to slippery conditions, ice warning sensors for application on carriageways have been developed. These are expected to react to the temperature of the road surface, which would be an advance compared with existing warning sensors in the vehicle that measure the air temperature. The aim of this project is to investigate the function of these types of ice warning sensors. This will be done both in a laboratory environment and in the field in the winter before and after the warning sensor has been exposed to the effect of studded tyres, snow ploughs and salting. The type of ice warning sensor that was available consisted of a yellow background plate with a symbol in the form of a snow star punched out from the middle. According to the manufacturer, this symbol was to change colour, from yellow to dark orange, at a temperature of +2°C. The test was divided into three stages, preliminary field tests on roads without traffic (Stage 1), laboratory tests in a controlled climate room (Stage 2), and field tests on roads both with and without traffic (Stage 3).
Place, publisher, year, edition, pages
Linköping: Statens väg- och transportforskningsinstitut, 2008. , p. 40
Series
VTI notat ; 26-2007
Keywords [en]
Icy road, Sensor, Detection, Surfacing, Temperature, Test, Laboratory, In situ, Measurement, Observation, Visibility, Prototype, Colour, Change
National Category
Infrastructure Engineering
Research subject
70 Road: Maintenance, 71 Road: Winter maintenance
Identifiers
URN: urn:nbn:se:vti:diva-1659OAI: oai:DiVA.org:vti-1659DiVA, id: diva2:670371
2013-12-032013-12-032025-09-11Bibliographically approved