Speed management is a cornerstone of the Safe System approach to road traffic safety, underpinning nearly all related interventions. Lowering traffic speeds enhances the ability to react in time to avoid collisions and significantly reduces the force of impact when crashes occur, thereby mitigating the severity of injuries. Even modest reductions in average driving speeds can yield substantial safety benefits. For example, a 10% decrease in mean speed is estimated to result in a 20% reduction in injury crashes and a 40% reduction in fatal crashes.
Effective speed management is therefore central to the development of a Safe System. Beyond preventing deaths and serious injuries, it also contributes to broader societal goals such as creating sustainable communities, enhancing urban liveability, and promoting public health, safety, and equity.
Among the nine recommendations developed by an academic expert group, excessive speed is identified as a major issue in most countries—posing a significant challenge for governments worldwide. In Sweden, it is estimated that full compliance with speed limits could reduce the number of road fatalities by approximately 20%.
To improve speed compliance and lower average speeds, increased enforcement is a commonly used strategy. Many countries have now introduced automated speed enforcement systems. These camera-based systems typically operate in two forms: spot speed cameras, which monitor and enforce speed at a specific location, and section control, which automatically enforces compliance based on the average speed over a defined road segment. Earlier studies have investigated the effects of spot cameras as well as section control and found that both spot speed cameras and section control are effective in reducing mean speeds, P85 and speed variations between vehicles.
To evaluate the effects of different interventions aiming to control speed, different types of speed measurement methods are often used. It is crucial to have measurements that give a correct picture of the actual speeds at the location or area where the intervention is performed but it is also important to consider other aspects such as cost effectiveness and road worker safety when performing the measurements. Examples of different measurement methods commonly used are pneumatic tubes, radar and probe data.
An ongoing study contains two different tasks, the first is to evaluate the effects of speed cameras used in portals in Sweden and the second is to analyse and explore different types of evaluation methods at the locations where speed cameras will be applied in 2026.
The aim of this study is to explore three different measurement methods often used to evaluate speed management interventions such as speed cameras. The different methods studied are pneumatic tubes, radar and probe data from INRIX.